Benutzer Diskussion:PaulRiegel/TrueOS
Zur Navigation springen
Zur Suche springen
Dinge, die gesichert werden sollte, wenn größer umgezogen wird
muss
- persönliche Daten
- ~
- Festhalten der UID
sudo cat /etc/passwd | grep ~
iooi:*:1001:1001:IOOI:/usr/home/iooi:/bin/csh
- Zugangsdaten fürs Netzwerk (WPA)
- /etc/wpa_supplicant.conf
- bestehende genutzte Zertifikate mitnehmen
ls /usr/local/etc/ssl/certs/
Installation mit 2 Geräten für Massenspeicher als Spiegel
pc-sysinstall.log
kern.geom.debugflags: 0 -> 16
kern.geom.label.disk_ident.enable: 0 -> 0
Deleting all gparts
Running: gpart destroy -F /dev/ada0
gpart: arg0 'ada0': Invalid argument
Running: zpool labelclear -f /dev/ada0
failed to read label from /dev/ada0
Running: gpart create -s gpt /dev/ada0
ada0 created
Running: gpart destroy -F /dev/ada0
ada0 destroyed
Clearing gpt backup table location on disk
Running: dd if=/dev/zero of=/dev/ada0 bs=1m count=1
1+0 records in
1+0 records out
1048576 bytes transferred in 0.046040 secs (22775338 bytes/sec)
Running: dd if=/dev/zero of=/dev/ada0 bs=1m oseek=305241
dd: /dev/ada0: short write on character device
dd: /dev/ada0: end of device
5+0 records in
4+1 records out
4546560 bytes transferred in 0.082831 secs (54889445 bytes/sec)
Running gpart on /dev/ada0
Running: gpart create -s GPT -f active /dev/ada0
ada0 created
Running: gpart add -s 512 -t freebsd-boot /dev/ada0
ada0p1 added
Stamping boot sector on /dev/ada0
Running: gpart bootcode -b /boot/pmbr /dev/ada0
bootcode written to ada0
Looping through _zvars: /dev/ada0p2
Looping through _zvars: /dev/ada2
Setting up ZFS disk /dev/ada2
kern.geom.debugflags: 16 -> 16
kern.geom.label.disk_ident.enable: 0 -> 0
Deleting all gparts
Running: gpart destroy -F /dev/ada2
gpart: arg0 'ada2': Invalid argument
Running: zpool labelclear -f /dev/ada2
failed to read label from /dev/ada2
Running: gpart create -s gpt /dev/ada2
ada2 created
Running: gpart destroy -F /dev/ada2
ada2 destroyed
Clearing gpt backup table location on disk
Running: dd if=/dev/zero of=/dev/ada2 bs=1m count=1
1+0 records in
1+0 records out
1048576 bytes transferred in 0.046489 secs (22555159 bytes/sec)
Running: dd if=/dev/zero of=/dev/ada2 bs=1m oseek=305241
dd: /dev/ada2: short write on character device
dd: /dev/ada2: end of device
5+0 records in
4+1 records out
4546560 bytes transferred in 0.075279 secs (60396406 bytes/sec)
Running gpart on /dev/ada2
Running: gpart create -s GPT -f active /dev/ada2
ada2 created
Running: gpart add -s 512 -t freebsd-boot /dev/ada2
ada2p1 added
Stamping boot sector on /dev/ada2
Running: gpart bootcode -b /boot/pmbr /dev/ada2
bootcode written to ada2
Running: gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 /dev/ada2
partcode written to ada2p1
bootcode written to ada2
Running: gpart add -a 4k -s 305230M -t freebsd-zfs /dev/ada0
ada0p2 added
Cloning disk layout to ZFS disk /dev/ada2
Running: gpart add -a 4k -s 305230M -t freebsd-zfs /dev/ada2
ada2p2 added
Running: gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 /dev/ada0
partcode written to ada0p1
bootcode written to ada0
Creating geli provider for /dev/ada0p2
Running: geli init -g -b -J /tmp/.pc-sysinstall/part-info-enc/-dev-ada0p2-encpass /dev/ada0p2
Metadata backup can be found in /var/backups/ada0p2.eli and
can be restored with the following command:
# geli restore /var/backups/ada0p2.eli /dev/ada0p2
Running: geli attach -j /tmp/.pc-sysinstall/part-info-enc/-dev-ada0p2-encpass /dev/ada0p2
Setting up GELI on mirrored disks: /dev/ada2p2
Running: geli init -g -b -J /tmp/.pc-sysinstall/part-info-enc/-dev-ada0p2-encpass /dev/ada2p2
Metadata backup can be found in /var/backups/ada2p2.eli and
can be restored with the following command:
# geli restore /var/backups/ada2p2.eli /dev/ada2p2
Running: geli attach -j /tmp/.pc-sysinstall/part-info-enc/-dev-ada0p2-encpass /dev/ada2p2
NEWFS: /dev/ada0p2 - ZFS
Creating storage pool vatertop with mirror /dev/ada0p2.eli /dev/ada2p2.eli
Running: zpool create -m none -f vatertop mirror /dev/ada0p2.eli /dev/ada2p2.eli
zfs create -p vatertop/ROOT
Running: zfs create -p vatertop/ROOT
zfs create -p vatertop/ROOT/initial
Running: zfs create -p vatertop/ROOT/initial
Running: zfs set mountpoint=/mnt vatertop/ROOT/initial
Stamping vatertop/ROOT/initial as bootfs
Running: zpool set bootfs=vatertop/ROOT/initial vatertop
Running: zfs set compress=lz4 vatertop/ROOT/initial
Running: zfs set atime=off vatertop/ROOT/initial
zfs create -p vatertop/tmp
Running: zfs create -p vatertop/tmp
Running: zfs set mountpoint=/mnt/tmp vatertop/tmp
Running: zfs set compress=lz4 vatertop/tmp
Running: zfs set setuid=off vatertop/tmp
zfs create -p vatertop/usr
Running: zfs create -p vatertop/usr
Running: zfs set mountpoint=/mnt/usr vatertop/usr
Running: zfs set canmount=off vatertop/usr
Running: zfs set mountpoint=none vatertop/usr
zfs create -p vatertop/usr/home
Running: zfs create -p vatertop/usr/home
Running: zfs set mountpoint=/mnt/usr/home vatertop/usr/home
Running: zfs set compress=lz4 vatertop/usr/home
zfs create -p vatertop/usr/jails
Running: zfs create -p vatertop/usr/jails
Running: zfs set mountpoint=/mnt/usr/jails vatertop/usr/jails
Running: zfs set compress=lz4 vatertop/usr/jails
zfs create -o canmount=off -p vatertop/usr/local
Running: zfs create -o canmount=off -p vatertop/usr/local
Running: zfs set mountpoint=none vatertop/usr/local
zfs create -o canmount=off -p vatertop/usr/local/share
Running: zfs create -o canmount=off -p vatertop/usr/local/share
Running: zfs set mountpoint=none vatertop/usr/local/share
zfs create -p vatertop/usr/local/share/doc
Running: zfs create -p vatertop/usr/local/share/doc
Running: zfs set mountpoint=/mnt/usr/local/share/doc vatertop/usr/local/share/doc
Running: zfs set compress=gzip vatertop/usr/local/share/doc
zfs create -p vatertop/usr/obj
Running: zfs create -p vatertop/usr/obj
Running: zfs set mountpoint=/mnt/usr/obj vatertop/usr/obj
Running: zfs set compress=lz4 vatertop/usr/obj
zfs create -p vatertop/usr/ports
Running: zfs create -p vatertop/usr/ports
Running: zfs set mountpoint=/mnt/usr/ports vatertop/usr/ports
Running: zfs set compress=lz4 vatertop/usr/ports
zfs create -p vatertop/usr/src
Running: zfs create -p vatertop/usr/src
Running: zfs set mountpoint=/mnt/usr/src vatertop/usr/src
Running: zfs set compress=lz4 vatertop/usr/src
zfs create -p vatertop/var
Running: zfs create -p vatertop/var
Running: zfs set mountpoint=/mnt/var vatertop/var
Running: zfs set canmount=off vatertop/var
Running: zfs set atime=on vatertop/var
zfs create -p vatertop/var/audit
Running: zfs create -p vatertop/var/audit
Running: zfs set mountpoint=/mnt/var/audit vatertop/var/audit
Running: zfs set compress=lz4 vatertop/var/audit
zfs create -p vatertop/var/log
Running: zfs create -p vatertop/var/log
Running: zfs set mountpoint=/mnt/var/log vatertop/var/log
Running: zfs set compress=lz4 vatertop/var/log
Running: zfs set exec=off vatertop/var/log
Running: zfs set setuid=off vatertop/var/log
zfs create -p vatertop/var/mail
Running: zfs create -p vatertop/var/mail
Running: zfs set mountpoint=/mnt/var/mail vatertop/var/mail
Running: zfs set compress=lz4 vatertop/var/mail
zfs create -p vatertop/var/tmp
Running: zfs create -p vatertop/var/tmp
Running: zfs set mountpoint=/mnt/var/tmp vatertop/var/tmp
Running: zfs set compress=lz4 vatertop/var/tmp
Running: zfs set exec=off vatertop/var/tmp
Running: zfs set setuid=off vatertop/var/tmp
Running: tar xvpf /dist/packages/All/fbsd-distrib.txz -C /mnt
x ./ x ./root/ x ./proc/ x ./net/ x ./etc/ x ./.cshrc x ./usr/ x ./bin/ x ./boot/ x ./lib/ x ./libexec/ x ./rescue/ x ./mnt/ x ./sbin/ x ./.profile x ./tmp/ x ./sys x ./COPYRIGHT x ./media/ x ./dev/ x ./var/
Running: mkdir -p /mnt/compat Running: mkdir -p /mnt/packages Running: mount_nullfs /dist/packages /mnt/packages pkg -c /mnt add /packages/All/FreeBSD--development-12.0.s20171108182534.txz
pkg -c /mnt add /packages/All/FreeBSD-zfs-12.0.s20171108182534.txz Running: umount -f /mnt/packages Running: mkdir -p /mnt/usr/.pkgtmp Running: mount_nullfs /dist/packages /mnt/mnt Running: cd /mnt/mnt Running chroot command: which pkg-static Bootstraping pkgng.. Running: cd /dist/packages Running: pkg -c /mnt add /mnt/All/pkg-1.10.1.txz Installing pkg-1.10.1... Extracting pkg-1.10.1: .......... done Running chroot command: pkg -R /mnt/repo-installer update -f Packages to install: 22 Running chroot command: pkg info -e misc/trueos-desktop Installing package: misc/trueos-desktop Running chroot command: pkg add /mnt/All/trueos-desktop-201710251909.txz Running chroot command: pkg add /mnt/All/trueos-desktop-201710251909.txz Installing trueos-desktop-201710251909...
Extracting trueos-desktop-201710251909: .......... done Doing first-time bootstrap * service ipfw added to runlevel boot * service devd added to runlevel boot * service devfs added to runlevel boot * rc-update: routing already installed in runlevel `boot'; skipping * service automount added to runlevel default * service statd added to runlevel default * service lockd added to runlevel default * service rpcbind added to runlevel default * service cupsd added to runlevel default * service cups_browsed added to runlevel default * rc-update: service `dhcpcd' is not in the runlevel `default' * rc-update: service `wpa_supplicant' is not in the runlevel `default' * service openntpd added to runlevel default * service pcdm added to runlevel default * service sysadm added to runlevel default * service dbus added to runlevel default * rc-update: service `hald' does not exist * service trueosinit added to runlevel default * service moused added to runlevel default * service bsdstats added to runlevel default * service automountd added to runlevel default * service autounmountd added to runlevel default * rc-update: service `sndiod' does not exist * service mountlate added to runlevel default webcamd_enable: -> YES kldload_i915: -> kld_list: -> kldload_i915kms: -> * rc-update: trueosinit already installed in runlevel `default'; skipping Message from anacron-2.3_6: Configuration hints: - Edit /usr/local/etc/anacrontab - Deactivate the 'periodic' commands in /etc/crontab - Add a call to anacron to /etc/crontab, like 0 0 * * * root /usr/local/sbin/anacron - Add anacron_enable="YES" to /etc/rc.conf - Read anacron(8) and anacrontab(5) Message from bsdstats-6.0_2:
Running chroot command: rm -rf /usr/local/tmp/All
Running chroot command: pkg info -e x11-fonts/droid-fonts-ttf
Package installation complete!
Cleaning up: /mnt/usr/.pkgtmp
Running: cd /dev
Running: umount /mnt/mnt
Running: rmdir /mnt/usr/.pkgtmp
Running chroot command: /usr/bin/cap_mkdb /etc/login.conf
Setting em0 to DHCP on the system.
Setting wlan0 to DHCP on the system.
Creating parent wlan0 for iwn0
Running chroot command: ln -s /usr/home /home
Setting hostname: trueos-6202
Running external command: /root/save-config.sh
Running external command: cp /root/defaultpkgbranch ${FSMNT}/root/defaultpkgbranch
Running chroot command: sh /usr/local/share/trueos/scripts/sys-init.sh desktop en_US
Running chroot command: touch /var/.trueos-firstboot
Running chroot command: touch /var/.trueos-firstgui
Running external command: cp /etc/X11/xorg.conf ${FSMNT}/etc/X11/xorg.conf
Running chroot command: echo "pc101 us altgr-intl" >/var/.wizardKeyboard
Running chroot command: newaliases
Running: mount -t devfs devfs /mnt/dev
Running: cp /boot/zfs/zpool.cache /mnt/boot/zfs/
Running: ln -s ../zfs /mnt/boot/kernel/zfs
Running: cp /etc/hostid /mnt/etc/hostid
Running: umount /mnt/dev
ZFS Unmount: vatertop/var/tmp
Running: zfs unmount vatertop/var/tmp
Running: zfs set mountpoint=/var/tmp vatertop/var/tmp
ZFS Unmount: vatertop/var/mail
Running: zfs unmount vatertop/var/mail
Running: zfs set mountpoint=/var/mail vatertop/var/mail
ZFS Unmount: vatertop/var/log
Running: zfs unmount vatertop/var/log
Running: zfs set mountpoint=/var/log vatertop/var/log
ZFS Unmount: vatertop/var/audit
Running: zfs unmount vatertop/var/audit
Running: zfs set mountpoint=/var/audit vatertop/var/audit
ZFS Unmount: vatertop/usr/src
Running: zfs unmount vatertop/usr/src
Running: zfs set mountpoint=/usr/src vatertop/usr/src
ZFS Unmount: vatertop/usr/ports
Running: zfs unmount vatertop/usr/ports
Running: zfs set mountpoint=/usr/ports vatertop/usr/ports
ZFS Unmount: vatertop/usr/obj
Running: zfs unmount vatertop/usr/obj
Running: zfs set mountpoint=/usr/obj vatertop/usr/obj
ZFS Unmount: vatertop/usr/local/share/doc
Running: zfs unmount vatertop/usr/local/share/doc
Running: zfs set mountpoint=/usr/local/share/doc vatertop/usr/local/share/doc
ZFS Unmount: vatertop/usr/jails
Running: zfs unmount vatertop/usr/jails
Running: zfs set mountpoint=/usr/jails vatertop/usr/jails
ZFS Unmount: vatertop/usr/home
Running: zfs unmount vatertop/usr/home
Running: zfs set mountpoint=/usr/home vatertop/usr/home
ZFS Unmount: vatertop/tmp
Running: zfs unmount vatertop/tmp
Running: zfs set mountpoint=/tmp vatertop/tmp
Unmounting: /mnt
Running: umount -f /mnt
Installation finished!
part-info_-dev-ada0p2
ZFS#/(compress=lz4|atime=off),/tmp(compress=lz4|setuid=off),/usr(canmount=off|mountpoint=none),/usr/home(compress=lz4),/usr/jails(compress=lz4),/usr/local/share/doc(compress=gzip),/usr/obj(compress=lz4),/usr/ports(compress=lz4),/usr/src(compress=lz4),/var(canmount=off|atime=on|mountpoint=none),/var/audit(compress=lz4),/var/log(compress=lz4|exec=off|setuid=off),/var/mail(compress=lz4),/var/tmp(compress=lz4|exec=off|setuid=off)#ON#zpool0#GPT#mirror /dev/ada0p2.eli /dev/ada2p2.eli
sys-install.cfg
# Auto-Generated pc-sysinstall configuration
installInteractive=no
installMode=fresh
installType=TrueOS
packageType=pkg
distFiles=base doc kernel lib32
zpoolName=vatertop
zfsForce4k=YES
netSaveDev=AUTO-DHCP-SLAAC
installMedium=local
localPath=/dist
# Disk setup for ada0
disk0=ada0
partition=ALL
bootManager=BSD
partscheme=GPT
commitDiskPart
# Partition Setup for ada0(ALL)
# All sizes are expressed in MB
# Avail FS Types, UFS, UFS+S, UFS+SUJ, UFS+J, ZFS, SWAP
# UFS.eli, UFS+S.eli, UFS+SUJ, UFS+J.eli, ZFS.eli, SWAP.eli
disk0-part=ZFS.eli 305230 /(compress=lz4|atime=off),/tmp(compress=lz4|setuid=off),/usr(canmount=off|mountpoint=none),/usr/home(compress=lz4),/usr/jails(compress=lz4),/usr/local/share/doc(compress=gzip),/usr/obj(compress=lz4),/usr/ports(compress=lz4),/usr/src(compress=lz4),/var(canmount=off|atime=on|mountpoint=none),/var/audit(compress=lz4),/var/log(compress=lz4|exec=off|setuid=off),/var/mail(compress=lz4),/var/tmp(compress=lz4|exec=off|setuid=off) (mirror: ada2)
encpass=das-ist-das-passwort-fuer-die-verschluesselung-des-massenspeichers-im-klartext
commitDiskLabel
runExtCommand=/root/save-config.sh
installPackages=misc/trueos-desktop x11/lumina sysutils/fusefs-ntfs www/firefox www/qupzilla-qt5 mail/thunderbird mail/trojita multimedia/vlc multimedia/openh264 multimedia/libdvdcss audio/pianobar x11-themes/cursor-jimmac-theme graphics/phototonic misc/trueos-meta-hunspell x11/qterminal graphics/xsane print/qpdfview print/cups-pdf print/cups-filters print/gutenprint x11-fonts/noto-lite x11-fonts/droid-fonts-ttf
runExtCommand=cp /root/defaultpkgbranch ${FSMNT}/root/defaultpkgbranch
runCommand=sh /usr/local/share/trueos/scripts/sys-init.sh desktop en_US
# Touch flags to enable TrueOS setup at first boot
runCommand=touch /var/.trueos-firstboot
runCommand=touch /var/.trueos-firstgui
runExtCommand=cp /etc/X11/xorg.conf ${FSMNT}/etc/X11/xorg.conf
runCommand=echo "pc101 us altgr-intl" >/var/.wizardKeyboard
runCommand=newaliases
mirroring
Ersetzen von einem Massenspeicher als Teil von einem mirror
WIP
zpool status
pool: vzfspool
state: DEGRADED
status: One or more devices could not be opened. Sufficient replicas exist for
the pool to continue functioning in a degraded state.
action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-2Q
scan: scrub repaired 0 in 0h1m with 0 errors on Sun mm dd HH:MM:SS yyyy
config:
NAME STATE READ WRITE CKSUM
vzfspool DEGRADED 0 0 0
mirror-0 DEGRADED 0 0 0
4561791786978147166 UNAVAIL 0 0 0 was /dev/ada0p2.eli
ada1p2.eli ONLINE 0 0 0
errors: No known data errors
sudo zpool online vzfspool 4561791786978147166
warning: device '4561791786978147166' onlined, but remains in faulted state use 'zpool replace' to replace devices that are no longer present
zpool replace vzfspool 4561791786978147166
cannot open '4561791786978147166': no such GEOM provider must be a full path or shorthand device name
zpool replace vzfspool /dev/ada0p2.eli
cannot open '/dev/ada0p2.eli': No such file or directory
sudo zpool detach vzfspool /dev/ada0p2.eli
zpool status
pool: vzfspool
state: DEGRADED
status: One or more devices could not be opened. Sufficient replicas exist for
the pool to continue functioning in a degraded state.
action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-2Q
scan: scrub repaired 0 in 0h1m with 0 errors on Sun mm dd HH:MM:SS yyyy
config:
NAME STATE READ WRITE CKSUM
vzfspool DEGRADED 0 0 0
mirror-0 DEGRADED 0 0 0
4561791786978147166 UNAVAIL 0 0 0 was /dev/ada0p2.eli
ada1p2.eli ONLINE 0 0 0
errors: No known data errors
sudo zpool detach vzfspool /dev/ada0p2.eli
zpool status
pool: vzfspool
state: ONLINE
scan: scrub repaired 0 in 0h1m with 0 errors on Sun mm dd HH:MM:SS yyyy
config:
NAME STATE READ WRITE CKSUM
vzfspool ONLINE 0 0 0
ada1p2.eli ONLINE 0 0 0
errors: No known data errors
: <code>gpart show</code>
<pre>
=> 34 976773101 ada0 GPT (466G)
34 2014 - free - (1.0M)
2048 976771072 1 linux-data (466G)
976773120 15 - free - (7.5K)
=> 40 976773088 ada1 GPT (466G)
40 512 1 freebsd-boot (256K)
552 934799360 2 freebsd-zfs (446G)
934799912 41943040 3 freebsd-swap (20G)
976742952 30176 - free - (15M)
: <code>gpart backup ada1</code>
<pre>
GPT 152
1 freebsd-boot 40 512
2 freebsd-zfs 552 934799360
3 freebsd-swap 934799912 41943040
: <code>gpart backup ada1 | gpart restore -F ada0</code>
<pre>
gpart backup ada1 | gpart restore -F ada0
: <code>gpart show</code>
<pre>
=> 40 976773088 ada0 GPT (466G)
40 512 1 freebsd-boot (256K)
552 934799360 2 freebsd-zfs (446G)
934799912 41943040 3 freebsd-swap (20G)
976742952 30176 - free - (15M)
=> 40 976773088 ada1 GPT (466G)
40 512 1 freebsd-boot (256K)
552 934799360 2 freebsd-zfs (446G)
934799912 41943040 3 freebsd-swap (20G)
976742952 30176 - free - (15M)
zpool status
pool: vzfspool
state: ONLINE
scan: scrub repaired 0 in 0h1m with 0 errors on Sun mm dd HH:MM:SS yyyy
config:
NAME STATE READ WRITE CKSUM
vzfspool ONLINE 0 0 0
ada1p2.eli ONLINE 0 0 0
errors: No known data errors
ls /dev/ | grep ada
zpool attach vzfspool /dev/ada1 /dev/ada0
cannot attach /dev/ada0 to /dev/ada1: no such device in pool
geli backup /dev/ada1p2 ~/geli.backup
sudo geli restore ~/geli.backup /dev/ada0p2
ls /dev | grep ada
ada0 ada0p1 ada0p2 ada0p3 ada1 ada1p1 ada1p2 ada1p2.eli ada1p3
geli attach /dev/ada0p2
Enter passphrase:
geli status
Name Status Components
ada1p2.eli ACTIVE ada1p2
label/swap0.eli ACTIVE label/swap0
ada0p2.eli ACTIVE ada0p2
ls /dev | grep ada
ada0 ada0p1 ada0p2 ada0p2.eli ada0p3 ada1 ada1p1 ada1p2 ada1p2.eli ada1p3
sudo zpool attach vzfspool /dev/ada0p2.eli /dev/ada1p2.eli
Make sure to wait until resilver is done before rebooting.
If you boot from pool 'vzfspool', you may need to update
boot code on newly attached disk '/dev/ada1p2.eli'.
Assuming you use GPT partitioning and 'da0' is your new boot disk
you may use the following command:
gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 da0
gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 ada1p1
gpart: No such geom: ada0p1.
sudo gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 /dev/ada1
partcode written to ada1p1 bootcode written to ada1
geli status
Name Status Components
ada0p2.eli ACTIVE ada0p2
ada1p2.eli ACTIVE ada1p2
label/swap0.eli ACTIVE label/swap0
sudo zpool attach vzfspool /dev/ada1p2.eli /dev/ada0p2.eli
invalid vdev specification use '-f' to override the following errors: /dev/ada0p2.eli is part of active pool 'vzfspool'
sudo zpool attach vzfspool /dev/ada0p2.eli /dev/ada1p2.eli
invalid vdev specification use '-f' to override the following errors: /dev/ada0p2.eli is part of active pool 'vzfspool'
zpool status
pool: vzfspool
state: ONLINE
scan: resilvered 12.3G in 0h1m with 0 errors on Sun mm dd HH:MM:SS yyyy
config:
NAME STATE READ WRITE CKSUM
vzfspool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
ada1p2.eli ONLINE 0 0 0
ada0p2.eli ONLINE 0 0 0
errors: No known data errors
- Siehe auch
Ersetzen von einem Massenspeicher als Teil von einem mirror "pc-sysinstall stlyle"
| pc-sysinstall | |
|---|---|
| create | replace |
|
Zerstören aller möglichen Einträge zur Partitionierung | |
Running: gpart destroy -F /dev/ada0 gpart: arg0 'ada0': Invalid argument Running: zpool labelclear -f /dev/ada0 failed to read label from /dev/ada0 Running: gpart create -s gpt /dev/ada0 ada0 created Running: gpart destroy -F /dev/ada0 ada0 destroyed Clearing gpt backup table location on disk Running: dd if=/dev/zero of=/dev/ada0 bs=1m count=1 1+0 records in 1+0 records out 1048576 bytes transferred in 0.046040 secs (22775338 bytes/sec) Running: dd if=/dev/zero of=/dev/ada0 bs=1m oseek=305241 dd: /dev/ada0: short write on character device dd: /dev/ada0: end of device 5+0 records in 4+1 records out 4546560 bytes transferred in 0.082831 secs (54889445 bytes/sec) |
|
|
(neue) Partitionstabelle erstellen | |
Running gpart on /dev/ada0 Running: gpart create -s GPT -f active /dev/ada0 ada0 created |
|
|
Tätigkeit | |
Running: gpart add -s 512 -t freebsd-boot /dev/ada0 ada0p1 added Stamping boot sector on /dev/ada0 Running: gpart bootcode -b /boot/pmbr /dev/ada0 bootcode written to ada0 |
|
|
??? | |
Looping through _zvars: /dev/ada0p2 Looping through _zvars: /dev/ada2 |
|
|
weiteren Massenspeicher für den Spiegel gleichermaßen behandeln | |
Setting up ZFS disk /dev/ada2 kern.geom.debugflags: 16 -> 16 kern.geom.label.disk_ident.enable: 0 -> 0 Deleting all gparts Running: gpart destroy -F /dev/ada2 gpart: arg0 'ada2': Invalid argument Running: zpool labelclear -f /dev/ada2 failed to read label from /dev/ada2 Running: gpart create -s gpt /dev/ada2 ada2 created Running: gpart destroy -F /dev/ada2 ada2 destroyed Clearing gpt backup table location on disk Running: dd if=/dev/zero of=/dev/ada2 bs=1m count=1 1+0 records in 1+0 records out 1048576 bytes transferred in 0.046489 secs (22555159 bytes/sec) Running: dd if=/dev/zero of=/dev/ada2 bs=1m oseek=305241 dd: /dev/ada2: short write on character device dd: /dev/ada2: end of device 5+0 records in 4+1 records out 4546560 bytes transferred in 0.075279 secs (60396406 bytes/sec) Running gpart on /dev/ada2 Running: gpart create -s GPT -f active /dev/ada2 ada2 created Running: gpart add -s 512 -t freebsd-boot /dev/ada2 ada2p1 added Stamping boot sector on /dev/ada2 Running: gpart bootcode -b /boot/pmbr /dev/ada2 bootcode written to ada2 Running: gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 /dev/ada2 partcode written to ada2p1 bootcode written to ada2 Running: gpart add -a 4k -s 305230M -t freebsd-zfs /dev/ada0 ada0p2 added |
|
|
Übernehmen von den Eingenschaften für ZFS für die Partition vom weiteren Massenspeicher für den Spiegel | |
Cloning disk layout to ZFS disk /dev/ada2 Running: gpart add -a 4k -s 305230M -t freebsd-zfs /dev/ada2 ada2p2 added |
|
|
??? | |
Running: gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 /dev/ada0 partcode written to ada0p1 bootcode written to ada0 |
|
|
Verschlüsseln vom ersten Massenspeicher | |
Creating geli provider for /dev/ada0p2
Running: geli init -g -b -J /tmp/.pc-sysinstall/part-info-enc/-dev-ada0p2-encpass /dev/ada0p2
Metadata backup can be found in /var/backups/ada0p2.eli and
can be restored with the following command:
# geli restore /var/backups/ada0p2.eli /dev/ada0p2
Running: geli attach -j /tmp/.pc-sysinstall/part-info-enc/-dev-ada0p2-encpass /dev/ada0p2
|
|
|
Verschlüsseln vom weiteren Massenspeicher | |
Setting up GELI on mirrored disks: /dev/ada2p2
Running: geli init -g -b -J /tmp/.pc-sysinstall/part-info-enc/-dev-ada0p2-encpass /dev/ada2p2
Metadata backup can be found in /var/backups/ada2p2.eli and
can be restored with the following command:
# geli restore /var/backups/ada2p2.eli /dev/ada2p2
Running: geli attach -j /tmp/.pc-sysinstall/part-info-enc/-dev-ada0p2-encpass /dev/ada2p2
|
|
|
??? | |
NEWFS: /dev/ada0p2 - ZFS |
|
|
Erstellen vom Pool | |
Creating storage pool vzfspool with mirror /dev/ada0p2.eli /dev/ada2p2.eli Running: zpool create -m none -f vzfspool mirror /dev/ada0p2.eli /dev/ada2p2.eli |