Bearbeiten von „Diskussion:Maschine/nux“

== firmware foo ==

* <s>https://datacentersupport.lenovo.com/de/en/products/servers/system-x/system-x3550-m2/7946/downloads</s>
* https://www-945.ibm.com/support/fixcentral/systemx/selectFixes?parent=System%20x3550%20M2&product=ibm/systemx/7946&&platform=All&function=all
** https://www-945.ibm.com/support/fixcentral/systemx/selectFixes?parent=System%20x3550%20M2&product=ibm/systemx/7946&&platform=RHEL+6&function=all

: <code>chmod 764 `ls | grep bin`</code>

==== Umgebung für die Aktualisierungen ====

; Betriebssystem: CentOS 6 (6.10)

==== einzelne Aktualisierungen ====

===== IBM Dynamic System Analysis (DSA) - Preboot Embedded =====

<s>
: <code>wget https://ak-delivery04-mul.dhe.ibm.com/sdfdl/v2/sar/CM/XS/048ct/1/Xa.2/Xb.jusyLTSp44S0425vg-cRGWkkLwShwO89b9a2VIutOz5wb36OOyoSs9mcx-M/Xc.CM/XS/048ct/1/ibm_fw_dsa_dsytc5c-9.42_linux_32-64.bin/Xd./Xf.Lpr./Xg.9959454/Xi.habanero/XY.habanero/XZ.A6kkrizmM7kY-oW2UApkby29uGk/ibm_fw_dsa_dsytc5c-9.42_linux_32-64.bin</code>
: <code>chmod 764 ibm_fw_dsa_dsytc5c-9.42_linux_32-64.bin</code>
: <code>./ibm_fw_dsa_dsytc5c-9.42_linux_32-64.bin -s</code>
<!--
<pre>
IBM Command Line IMM Flash Update Utility v1.12.24
Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009 - 2013  All Rights Reserved.

Now 1 IMM LAN-over-USB device is discovered.
Pinging IMM IP address 169.254.95.118 .....OK
Unable to validate userid/password on IMM at IP address 169.254.95.118.
Connecting via IPMI device driver (KCS interface)....

Update package firmware type: Diagnostic
Update package build level:   DSYTC5C
Target's current build level: DSYTC5C

The IMM is preparing to receive the update.

Transferring image: 100%
Transfer complete.
Validating image.
Updating firmware:  100%
Update complete.

Firmware flashed successfully
</pre>
-->
</s>
Im Übrigen wird durch andere Werkzeuge von IBM auf die Version ''9.42'' verwiesen. (Keine Ahnung!)

: <code>wget https://ak-delivery04-mul.dhe.ibm.com/sdfdl/v2/sar/CM/XS/04k0a/1/Xa.2/Xb.jusyLTSp44S0425vg56_Fv3ICQqqzDyGmTpEn0IdCmNrnwGaFhVwgdeT38M/Xc.CM/XS/04k0a/1/ibm_fw_dsa_dsytc5f-9.53_linux_32-64.bin/Xd./Xf.Lpr./Xg.9959439/Xi.habanero/XY.habanero/XZ.1ssrQS6YS69wwVqp4DXRlWzGyrE/ibm_fw_dsa_dsytc5f-9.53_linux_32-64.bin</code>
: <code>chmod 764 ibm_fw_dsa_dsytc5f-9.53_linux_32-64.bin</code>
: <code>./ibm_fw_dsa_dsytc5f-9.53_linux_32-64.bin -s</code>
<!--
<pre>

</pre>
-->

===== IBM uEFI Flash =====

: <code>wget https://ak-delivery04-mul.dhe.ibm.com/sar/CMA/XSA/07ohu/0/ibm_fw_uefi_d6e164a-1.22_linux_32-64.bin</code>
: <code>chmod 764 ibm_fw_uefi_d6e164a-1.22_linux_32-64.bin</code>
: <code>./ibm_fw_uefi_d6e164a-1.22_linux_32-64.bin -s</code>
<!--
<pre>
IBM Command Line IMM Flash Update Utility v1.12.26
Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009 - 2014  All Rights Reserved.

Now 1 IMM LAN-over-USB device is discovered.
Pinging IMM IP address 169.254.95.118 .....OK
Unable to validate userid/password on IMM at IP address 169.254.95.118.
Connecting via IPMI device driver (KCS interface)....

Update package firmware type: uEFI
Update package build level:   D6E164A
Target's current build level: D6E162A

The IMM is preparing to receive the update.

Transferring image: 100%
Transfer complete.
Validating image.
Updating firmware:  100%
Update complete.

Firmware flashed successfully
Following the UEFI flash update, allow the system to reboot to the F1 prompt to complete the update process.
</pre>
-->

===== Integrated Management Module =====

Im Übrigen wird durch andere Werkzeuge von IBM auf die Version ''1.42'' verwiesen. (Keine Ahnung!)

: <code>wget https://ak-delivery04-mul.dhe.ibm.com/sdfdl/v2/sar/CM/XS/05ryn/0/Xa.2/Xb.jusyLTSp44S0wezTkzg_Q0UdX16fAX9nKGGf8DXOJxVM0a7UK3tOHQqhy-g/Xc.CM/XS/05ryn/0/ibm_fw_imm_yuoog9a-1.49_linux_32-64.bin/Xd./Xf.Lpr./Xg.9959418/Xi.habanero/XY.habanero/XZ.DK5mM1Lif4aN2kEl8LNX28TU-gs/ibm_fw_imm_yuoog9a-1.49_linux_32-64.bin</code>
: <code>chmod 764 ibm_fw_imm_yuoog9a-1.49_linux_32-64.bin</code>
: <code>./ibm_fw_imm_yuoog9a-1.49_linux_32-64.bin -s</code>
<!--
<pre>
IBM Command Line IMM Flash Update Utility v1.12.28                      
Licensed Materials - Property of IBM                                    
(C) Copyright IBM Corp. 2009 - 2015  All Rights Reserved.               

Now 1 IMM LAN-over-USB device is discovered.
Pinging IMM IP address 169.254.95.118 .....OK
Unable to validate userid/password on IMM at IP address 169.254.95.118.
Connecting via IPMI device driver (KCS interface)....                  

Update package firmware type: IMM
Update package build level:   YUOOG9A
Target's current build level: YUOOG9A

The IMM is preparing to receive the update.

Transferring image: 100%
Transfer complete.      
Validating image.
Updating firmware:  100%
Update complete.

Performing activation of the firmware:
Connected to IMM at IP address 169.254.95.118.
............

Waiting up to 240 seconds for LAN-over-USB interface to come back.
                                                     .......
............................................................
............................................................
............................................................
.
Waiting up to 240 seconds for the activation to complete:
............................................................
............................................................
..........

Waiting up to 240 seconds for the IMM to answer to build id requests:
............................................................
............................................................
............................................................
............................................................

Connecting to IMM by KCS...
The new version of the targeted firmware is YUOOG9A.
Waiting 240 seconds for the IMM to complete initialization before next operation.
............................................................
............................................................
............................................................
............................................................

Firmware flashed successfully
</pre>
-->

===== Online Broadcom NetXtreme and NetXtreme II Firmware Utility for Linux =====
<s>
: <code>wget https://ak-delivery04-mul.dhe.ibm.com/sar/CMA/XSA/03zay/12/brcm_fw_nic_2.2.1a_linux_32-64.bin</code>
: <code>chmod 764 brcm_fw_nic_2.2.1a_linux_32-64.bin</code>
: <code>./brcm_fw_nic_2.2.1a_linux_32-64.bin -s</code>
<!--
<pre>
IBM Ethernet Firmware Update Tool, Version 1.0.29                  


Warning. No Broadcom NetXtreme adapters found.
</pre>
<pre></pre>
-->
</s>

===== ServeRAID M5000 Series SAS/SATA Controller Firmware =====
<s>
: <code>wget https://ak-delivery04-mul.dhe.ibm.com/sar/CMA/XSA/06fl9/1/ibm_fw_sraidmr_m5000-12.15.0-0248_linux_32-64.bin</code>
: <code>chmod 764 ibm_fw_sraidmr_m5000-12.15.0-0248_linux_32-64.bin</code>
: <code>./ibm_fw_sraidmr_m5000-12.15.0-0248_linux_32-64.bin -s</code>
<!--
<pre>
Running in 64 bit mode.


*************************************************
 LSI MR Update Utility for use with IBM hardware
       Version 1.39 - Release Date 8/11/11
*************************************************

This update is for the following controllers:
 - ServeRAID M5015 - ServeRAID M5014 - ServeRAID M5025
Found 0 ServeRAID M, MR or MegaRAID Controller(s)

No controllers found... update not performed!

No controllers found for BIOS or firmware flash!
</pre>
-->
</s>

===== ServeRAID M1000 Series SAS/SATA Controllers Firmware =====
<s>
: <code>wget https://ak-delivery04-mul.dhe.ibm.com/sar/CMA/XSA/06fl7/0/ibm_fw_sraidmr_1000-20.13.1-0254_linux_32-64.bin</code>
: <code>chmod 764 ibm_fw_sraidmr_1000-20.13.1-0254_linux_32-64.bin</code>
: <code>./ibm_fw_sraidmr_1000-20.13.1-0254_linux_32-64.bin -s</code>
<!--
<pre>
Running in 64 bit mode.


*************************************************
 LSI MR Update Utility for use with IBM hardware
       Version 1.39 - Release Date 8/11/11
*************************************************

This update is for the following controllers:
 - ServeRAID M1115 SAS/SATA Controller - ServeRAID M1015 SAS/SATA Controller
Found 0 ServeRAID M, MR or MegaRAID Controller(s)

No controllers found... update not performed!

No controllers found for BIOS or firmware flash!
</pre>
-->
</s>

===== IBM ServeRAID MR10i and MR10is SAS Controller Firmware =====
<s>
: <code>wget https://ak-delivery04-mul.dhe.ibm.com/sar/CMA/XSA/02n9p/8/ibm_fw_sraidmr_10i-10is-11.0.1-0042_linux_32-64.bin</code>
: <code>chmod 764 ibm_fw_sraidmr_10i-10is-11.0.1-0042_linux_32-64.bin</code>
: <code>./ibm_fw_sraidmr_10i-10is-11.0.1-0042_linux_32-64.bin -s</code>
: <code>yum install -y ncurses-libs.i686</code>
<!--
<pre>

*************************************************
 LSI MR Update Utility for use with IBM hardware 
       Version 1.35 - Release Date 1/21/11       
*************************************************

This update is for the ServeRAID MR10i and MR10is Controllers

./MegaCLI: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory
No controllers found... update not performed!                                                                              

No controllers found for BIOS or firmware flash!
</pre>
-->
: <code>./ibm_fw_sraidmr_10i-10is-11.0.1-0042_linux_32-64.bin -s</code>
<!--
<pre>

*************************************************
 LSI MR Update Utility for use with IBM hardware
       Version 1.35 - Release Date 1/21/11
*************************************************

This update is for the ServeRAID MR10i and MR10is Controllers

Found 0 ServeRAID MR or MegaRAID Controller(s)

No controllers found... update not performed!

No controllers found for BIOS or firmware flash!
</pre>
-->
</s>

===== ToolsCenter Bootable Media Creator =====

====== ToolsCenter Bootable Media Creator 32 Bit ======
<s>
wget https://ak-delivery04-mul.dhe.ibm.com/sdfdl/v2/sar/CM/XS/05vs9/5/Xa.2/Xb.jusyLTSp44S0425vl6-VstlglyjyDRdRCKEaewhMKi3u7c37hd-C7NMAvbs/Xc.CM/XS/05vs9/5/ibm_utl_bomc_9.66_rhel6_i386.bin/Xd./Xf.Lpr./Xg.9959501/Xi.habanero/XY.habanero/XZ._zt_f0_jzom804GpjEVgysinkP4/ibm_utl_bomc_9.66_rhel6_i386.bin

chmod 764 ibm_utl_bomc_9.66_rhel6_i386.bin

./ibm_utl_bomc_9.66_rhel6_i386.bin
<!--
<pre>
WARNING! This package doesn't appear to match your system.
         It is likely that it will not properly execute.
         The following information was determined for your system:

           distribution = Red Hat
           release = 6
           processor architecture = Intel 64-bit

Extracting...
Executing...


./bomc.bin: error while loading shared libraries: libssl.so.10: cannot open shared object file: No such file or directory
</pre>
-->

yum install -y openssl.i686

./ibm_utl_bomc_9.66_rhel6_i386.bin
<!--
<pre>
WARNING! This package doesn't appear to match your system.
         It is likely that it will not properly execute.
         The following information was determined for your system:

           distribution = Red Hat
           release = 6
           processor architecture = Intel 64-bit

Extracting...
Executing...


./bomc.bin: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory
</pre>
-->

yum install -y libcurl.i686

./ibm_utl_bomc_9.66_rhel6_i386.bin
<!--
<pre>
WARNING! This package doesn't appear to match your system.
         It is likely that it will not properly execute.
         The following information was determined for your system:

           distribution = Red Hat
           release = 6
           processor architecture = Intel 64-bit

Extracting...
Executing...


IBM ToolsCenter Bootable Media Creator Version 9.66.06
(C) Copyright IBM Corp. 2014. All Rights Reserved.
This Program is licensed under the terms of the agreement available by invoking this utility with the --license option.  By extracting, copying, accessing, or using the Program, you agree to the terms of this agreement. If you do not agree to the terms, please uninstall the software and return it to IBM or the reseller from whom you acquired the software for a refund, if any.
</pre>
-->

./ibm_utl_bomc_9.66_rhel6_i386.bin
<!--
<pre></pre>
<pre>
/tmp/portable_install_00000000/gui/launchpad/splash/linuxx86/AZY_Splash: error while loading shared libraries: libXaw.so.7: cannot open shared object file: No such file or directory                                                                     
</pre>
<pre></pre>
-->

yum install -y libXaw.i686

./ibm_utl_bomc_9.66_rhel6_i386.bin
</s>

====== ToolsCenter Bootable Media Creator 64 Bit ======

<s>
: <code>wget https://ak-delivery04-mul.dhe.ibm.com/sdfdl/v2/sar/CM/XS/05vsa/4/Xa.2/Xb.jusyLTSp44S0425vl9_23VSoFi0vLeYVV9dHeGSBmbndVFAqGJDdCYCY32A/Xc.CM/XS/05vsa/4/ibm_utl_bomc_9.66_rhel6_x86-64.bin/Xd./Xf.Lpr./Xg.9959524/Xi.habanero/XY.habanero/XZ.Om6tolNcYPGkf35nk88sQyTSf1c/ibm_utl_bomc_9.66_rhel6_x86-64.bin</code>
: <code>chmod 764 ibm_utl_bomc_9.66_rhel6_x86-64.bin</code>
: <code>./ibm_utl_bomc_9.66_rhel6_x86-64.bin</code>
<!--
: <code></code>
: <code></code>
-->
</s>

===== IBM ServeRAID BR10i SAS Controller BIOS and Firmware =====

: <code>wget https://ak-delivery04-mul.dhe.ibm.com/sar/CMA/XSA/036nw/2/ibm_fw_sraidbr_10i-2.75_linux_32-64.bin</code>
: <code>chmod 764 ibm_fw_sraidbr_10i-2.75_linux_32-64.bin</code>
: <code>./ibm_fw_sraidbr_10i-2.75_linux_32-64.bin -s</code>
<!--
<pre>

**************************************************
 LSI IR Update Utility for use with IBM hardware  
       Version 2.02 - Release Date 1/21/10         
************************************************** 

This update is for the following controllers:
 - ServeRAID-BR10i(B3) in any System x server
 - ServeRAID-BR10i(C0) in any System x server

The platform ID for the host system is D6

There is/are 1 controller(s) in the system.
Controller 1 is ServeRAID-BR10i(B3) in any System x server
Attempting to flash controller 1!                         

Updating firmware on Controller 1.  Please wait....
Update of controller 1 firmware completed successfully.

Updating BIOS on Controller 1.  Please wait....
Update of controller 1 BIOS completed successfully.
                                                                                                                             
Updating UEFI driver on Controller 1.  Please wait....
Update of controller 1 UEFI driver completed successfully.

All controllers were updated properly.
The package will return a success code.

You must reboot your system to complete the firmware update process.
You do not need to reboot your system immediately.
</pre>
-->

== zerblitzen vom raid controller ==
* https://lenovopress.com/tips0737
* http://log.miip.de/how-tos/ibm-br10i-it-firmware-ohne-windows
----
* https://www.supermicro.com/wftp/driver/SAS/LSI/1064_1068/IT/Firmware/B3/LP-L8i/1.30.00/
** herunterladen
** entpacken
: <code>cd L8iLP_IT/Linux_i686_x86-64'' wechseln</code>
: <code>chmod 764 sasflash.exe</code>
: <code>./sasflash.exe -o -f L8iLP_IT.fw -b mptsas.rom</code>
<pre>

 ****************************************************************************
    LSI Corporation SAS FLASH Utility.                                       

    SASFlash Version 1.24.00.00 (2009.11.13) 

    Copyright (c) 2006-2007 LSI Corporation. All rights reserved.
 ****************************************************************************

        Advanced Mode Set

        Adapter Selected is a LSI SAS 1068E(B3):

        Executing Operation: Flash Firmware Image

                Checksum Passed: 00000000

                Verifying NVDATA Compatibility. . .
                NVDATA Versions Compatible         

                Product ID and Vendor ID do not match.
                Would you like to flash anyway [y/n]? y

                Valid BootLoader Image verified.

                Flashing IT Firmware over IR Firmware!
                Would you like to flash anyway [y/n]? y


                Beginning Firmware Download

                Firmware Download: SUCCESSFUL!

                Verifying the image flashed correctly. . . 

                Firmware Flash: SUCCESSFUL!

                Resetting Adapter:
                Adapter Successfully reset.

        Executing Operation: Flash BIOS Image

                Validating BIOS Image. . .

                BIOS Header Signature Valid.

                Checksum Passed: 00000000

                BIOS Image compatible with the SAS Controller.

                Attempting to Flash BIOS Image. . .

                BIOS Flash: SUCCESSFUL!


Finished Processing Commands Successfully.
        Exiting SASFlash.
</pre>