StuRa Diskussion:Install-Party/Fedora: Unterschied zwischen den Versionen

Aus Wiki StuRa HTW Dresden
Zur Navigation springen Zur Suche springen
 
(21 dazwischenliegende Versionen von 4 Benutzern werden nicht angezeigt)
Zeile 167: Zeile 167:


: <code>systemctl disable gdm</code>
: <code>systemctl disable gdm</code>
: <code>systemctl enable sdm</code>
: <code>systemctl enable sddm</code>


----
----
Auswaehlen von Plasma (Wayland) bei der Anmeldung


: <code>echo $XDG_SESSION_TYPE</code>
: <code>echo $XDG_SESSION_TYPE</code>
Zeile 175: Zeile 177:
wayland
wayland
</pre>
</pre>
==== Logo Fedora Silverblue ====
* https://silverblue.fedoraproject.org/public/
: <code>wget -c https://silverblue.fedoraproject.org/public/silverblue-logo.svg</code>
: <code>wget -c https://silverblue.fedoraproject.org/public/silverblue-black.svg</code>
: <code>wget -c https://silverblue.fedoraproject.org/public/silverblue-white.svg</code>
== systemd management GUI ==
=== systemd control module von KDE ===
Installieren vom Paket ''kcm_systemd'' ()
: <code>sudo dnf -y install kcm_systemd</code>
Starten der Anwendung kcm_systemd
: <code>kcmshell5 kcm_systemd</code>
== System von USB (live) erreichen ==
Mit dem Programm (GUI) ''Disks'' den Massenspeicher vom System entschluesseln.
: <code>sudo mount /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 /mnt -t btrfs -o subvol=root</code>
: <code>ls /mnt</code>
: <code>sudo mount /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 /mnt/home -t btrfs -o subvol=home</code>
: <code>ls /mnt/home/</code>
: <code>sudo mount /dev/nvme0n1p2 /mnt/boot</code>
: <code>sudo mount /dev/nvme0n1p1 /mnt/boot/efi</code>
: <code>sudo mount --bind /dev /mnt/dev</code>
: <code>sudo mount -t proc /proc /mnt/proc</code>
: <code>sudo mount -t sysfs /sys /mnt/sys</code>
: <code>sudo mount -t tmpfs tmpfs /mnt/run</code>
: <code>mkdir -p /mnt/run/systemd/resolve/</code>
: <code>echo 'nameserver 9.9.9.9' > /mnt/run/systemd/resolve/stub-resolv.conf</code>
: <code>sudo chroot /mnt</code>
----
: <code>ping heise.de</code>
: <code>sudo flatpak update</code>
: <code>sudo dnf update</code>
: <code>ls -l /lib64/libcrypto.so.3</code>
: <code>rm /lib64/libcrypto.so.3</code>
: <code>ln /lib64/libcrypto.so.3.0.5 /lib64/libcrypto.so.3</code>
: <code>sudo dnf update</code>
: <code>rm /lib64/libssl.so.3</code>
: <code>ln -s /lib64/libssl.so.3.0.5 /lib64/libssl.so.3</code>
: <code>sudo dnf update</code>
: <code>rm /lib64/liblzma.so.5</code>
: <code>ln -s /lib64/liblzma.so.5.2.5 /lib64/liblzma.so.5</code>
----
<!--
<pre>
    1* dnf update
    2  ls /lib64/libcrypto.so.3
    3  ls -l /lib64/libcrypto.so.3
    4  sudo dnf update
    5  ping 8.8.8.8
    6  ping heise.de
    7  systemctl status resolv
    8  ls /run/sys
    9  ls /run/
  10  exit
  11  ping heise.de
  12  dnf update
  13  flatpak update
  14  sudo flatpak update
  15  sudo dnf update
  16  ls -l /lib64/libcrypto.so.
  17  ls -l /lib64/libcrypto.so.3
  18  btrfs
  19  btrfs filesystem
  20  btrfs filesystem du
  21  btrfs filesystem du /
  22  btrfs filesystem df /
  23  sudo dnf install ddate
  24  cat /lib64/libcrypto.so.3
  25  cat /lib64/libcrypto.so.3.0.5
  26  rm /lib64/libcrypto.so.3
  27  rm /lib64/libcrypto.so.3
  28  ln /lib64/libcrypto.so.3.0.5 /lib64/libcrypto.so.3
  29  dnf update
  30  ln -l /lib64/liblzma.so.5
  31  ls -l /lib64/liblzma.so.5
  32  sudo dnf update
  33  cat  /lib64/libssl.so.3
  34  ln -s /lib64/libssl.so.3
  35  ls -l /lib64/libssl.so.3
  36  ls -l /lib64/libssl.so.3.0.8
  37  cat /lib64/libssl.so.3.0.8
  38  cat /lib64/libssl.so.3.0.5
  39  cd /home/
  40  ls
  41  ls Ich-5/
  42  ls Ich-5/Videos/
  43  ls Ich-5/Schreibtisch/
  44  sudo dnf update
  45  ln -s /lib64/libssl.so.3 /lib64/libssl.so.3.0.5
  46  ln -s /lib64/libssl.so.3 /lib64/libssl.so.3.0.5
  47  ln -s /lib64/libssl.so.3 /lib64/libssl.so.3.0.5
  48  rm /lib64/libssl.so.3
  49  ln -s /lib64/libssl.so.3.0.5 /lib64/libssl.so.3
  50  sudo dnf update
  51  rm /lib64/liblzma.so.5
  52  ln -s /lib64/liblzma.so.5.2.5 /lib64/liblzma.so.5
  53  history
  54  flatpak update
  55  dnf update
  56  cat /etc/fstab
  57  cat /etc/crypttab
  58  dnf autoremove
  59  dnf update --refresh
  60  ls /boot/efi/
  61  ls /boot/efi/System/
  62  ls /boot/efi/EFI/
  63  ls /boot/efi/EFI/BOOT/
  64  su Ich-5
  65  adduser
  66  id
  67  ls /root/
  68  ls -al /root/
  69  useradd
  70  useradd vater
  71  passwd vater
  72  passwd vater
  73  passwd vater
  74  passwd vater
  75  userdel vater
  76  userdel vater
  77  cat /etc/passwd
  78  useradd vater
  79  cat /etc/passwd
  80  userdel vater
  81  rm -rf /home/vater
  82  useradd vater
  83  nano /etc/sudoers
  84  passwd -G wheel
  85  passwd -g wheel
  86  nano /etc/passwd
  87  nano /etc/group
  88  reboot
  89  passwd vater
  90  passwd -v vater
  91  su vater
  92  passwd vater
  93  cd /etc/grub.d/
  94  ls
  95  grep -Rin live ./
  96  grep -Rin live /etc/grub2-efi.cfg
  97  grep -Rin live /etc/grub2.cfg
  98  less /etc/grub2.cfg
  99  less /etc/grub2-efi.cfg
  100  grep -Rin live /boot/grub2/
  101  grep -Rin live /boot/grub*
  102  nano /boot/grub.cfg
  103  nano /boot/grub2/grub.cfg
  104  dracut --regenerate-all
  105  dracut --regenerate-all -f
  106  dracut --regenerate-all
  107  cp /boot/grub2/grub.cfg /root/boot_grub2_grub.cfg_2023-03-01
  108  grub2-mkconfig -o /boot/grub2/grub.cfg
  109  cat /etc/fstab
  110  dnf reinstall grub2-efi grub2-efi-modules shim
  111  dnf reinstall
  112  nano /boot/grub2/grub.cfg
  113  ls /etc/grub.d/41_custom
  114  nano /etc/grub.d/41_custom
  115  nano /etc/grub.d/10_linux
  116  nano /etc/grub.d/40_custom
  117  nano /etc/grub.d/30_os-prober
  118  ls -l /lib64/libcrypto.so.3
  119  ls -al /lib64/libcrypto.so.3
  120  cat /lib64/libcrypto.so.3.0.8
  121  cat /lib64/libcrypto.so.3
  122* libcrypto.so.3
  123  dnf search ssl
  124  dnf provides libcrypto
  125  dnf provides libcrypto.so
  126  dnf provides libcrypto*
  127  dnf install openssl
  128* dnf reinstall openssl
  129  dnf provides libcrypto.so*
  130  dnf provides libcrypto.so.3*
  131  dnf reinstall openssl-libs
  132  dnf provides liblzma.so.*
  133  dnf reinstall xz-libs
  134  dnf reinstall --allowerasing xz-libs
  135  dnf --allowerasing install xz-libs
  136  dnf update xz-libs
  137  dnf reinstall xz-libs
  138  dnf reinstall xz-libs-5.2
  139  dnf reinstall xz-libs-5
  140  dnf reinstall xz-libs
  141  dnf reinstall xz-libs-5.2.5-9.fc36.x86_64
  142  dnf reinstall xz-libs-5.4.1-1.fc36.x86_64
  143  dnf provides libssl.so.3*
  144  dnf provides libQt
  145  dnf provides libQt*
  146  dnf update
  147  dnf provides libQt5EglFSDeviceIntegration.so.5*
  148  dnf reinstall qt5-qtbase-gui
  149  dnf provides libQt5Qml.so.5*
  150  dnf reinstall qt5-qtdeclarative
  151  dnf provides libQt5Concurrent.so.5*
  152  dnf reinstall qt5-qtbase
  153  dnf provides libQt5WaylandClient.so.5*
  154  dnf reinstall qt5-qtwayland
  155  dnf provides libKF5CoreAddons.so.5*
  156  dnf reinstall kf5-kcoreaddons
  157  dnf provides libKF5ConfigCore.so.5*
  158  dnf reinstall kf5-kconfig-core
  159  dnf provides libKF5I18n.so.5*
  160  dnf reinstall kf5-ki18n
  161  dnf provides libKF5WidgetsAddons.so.5*
  162  dnf reinstall kf5-kwidgetsaddons
  163  dnf provides libQt5X11Extras.so.5*
  164  dnf reinstall qt5-qtx11extras
  165  dnf provides libKF5WindowSystem.so.5.*
  166  dnf provides libKF5WindowSystem.so.5*
  167  dnf reinstall kf5-kwindowsystem
  168  dnf provides libKF5ConfigGui.so.5*
  169  dnf reinstall kf5-kconfig-gui
  170  dnf provides ibKF5DBusAddons.so.5*
  171  dnf provides libKF5DBusAddons.so.5*
  172  dnf reinstall libKF5DBusAddons
  173  dnf reinstall kf5-kdbusaddons
  174  dnf provides libKF5Service.so.5*
  175  dnf reinstall kf5-kservice
  176  dnf provides libKF5GuiAddons.so.5*
  177  dnf reinstall kf5-kguiaddons
  178  dnf provides libKF5Archive.so.5*
  179  dnf reinstall kf5-karchive
  180  dnf provides libKF5Completion.so.5*
  181  dnf reinstall kf5-kcompletion
  182  dnf provides libKF5JobWidgets.so.5*
  183  dnf reinstall kf5-kjobwidgets
  184  dnf provides libKF5Crash.so.5*
  185  dnf reinstall kf5-kcrash
  186  dnf provides libKF5Auth.so.5*
  187  dnf reinstall kf5-kauth-
  188  dnf reinstall kf5-kauth
  189  dnf provides libKF5Codecs.so.5*
  190  dnf reinstall kf5-kcodecs
  191  dnf provides libKF5ItemViews.so.5*
  192  dnf reinstall kf5-kitemviews
  193  dnf provides libKF5Solid.so.5
  194  dnf reinstall kf5-solid
  195  dnf provides libKF5SonnetCore.so.5
  196  dnf reinstall kf5-sonnet-core
  197  dnf provides libQt5Location.so.5*
  198  dnf reinstall qt5-qtlocation
  199  dnf provides libQt5TextToSpeech.so.5*
  200  dnf reinstall qt5-qtspeech
  201  dnf provides libKF5Notifications.so.5*
  202  dnf reinstall kf5-knotifications
  203  dnf provides dnf provides libQt5WebChannel.so.5*
  204  dnf provides libQt5WebChannel.so.5*
  205  dnf reinstall qt5-qtwebchannel
  206  history
</pre>
-->
----
<!--
<pre>
[  223.617433] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Quota mode: none.
[  277.589350] SELinux:  Context system_u:object_r:snappy_var_lib_t:s0 is not valid (left unmapped).
[  612.183196] nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000a address=0xfffffffffffffffc flags=0x0030]
[  612.183204] nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000a address=0x40 flags=0x0020]
[  612.183207] nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000a address=0x1fc flags=0x0020]
[  612.183210] nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000a address=0x180 flags=0x0020]
[  612.183213] nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000a address=0x1c0 flags=0x0020]
[  612.183216] nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000a address=0x80 flags=0x0020]
[  612.183218] nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000a address=0x140 flags=0x0020]
[  612.183221] nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000a address=0x100 flags=0x0020]
[  612.183224] nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000a address=0x340 flags=0x0020]
[  612.183226] nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000a address=0x2c0 flags=0x0020]
[  642.324472] nvme nvme0: I/O 97 QID 3 timeout, aborting
[  642.388041] nvme nvme0: I/O 98 QID 3 timeout, aborting
[  642.562671] nvme nvme0: I/O 163 QID 7 timeout, aborting
[  642.568063] nvme nvme0: I/O 164 QID 7 timeout, aborting
[  642.601816] nvme nvme0: I/O 226 QID 8 timeout, aborting
[  642.601817] nvme nvme0: Abort status: 0x0
[  642.635973] nvme nvme0: Abort status: 0x0
[  642.640218] nvme nvme0: Abort status: 0x0
[  649.998246] nvme nvme0: I/O 35 QID 1 timeout, aborting
[  672.557471] nvme nvme0: I/O 97 QID 3 timeout, reset controller
[  702.793214] nvme nvme0: I/O 17 QID 0 timeout, reset controller
[  735.505844] nvme nvme0: Abort status: 0x371
[  735.505854] nvme nvme0: Abort status: 0x371
[  735.505857] nvme nvme0: Abort status: 0x371
[  736.113345] hrtimer: interrupt took 212891731 ns
[  736.360417] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 6.497 msecs
[  736.425344] perf: interrupt took too long (50942 > 2500), lowering kernel.perf_event_max_sample_rate to 3000
[  736.616868] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 171.883 msecs
[  736.832972] perf: interrupt took too long (1342998 > 63677), lowering kernel.perf_event_max_sample_rate to 1000
[  800.014261] nvme nvme0: I/O 17 QID 0 timeout, disable controller
[  800.281093] nvme nvme0: Removing after probe failure status: -4
[  800.287200] I/O error, dev nvme0n1, sector 5573696 op 0x1:(WRITE) flags 0x1800 phys_seg 9 prio class 0
[  800.287204] I/O error, dev nvme0n1, sector 38304264 op 0x0:(READ) flags 0x0 phys_seg 17 prio class 0
[  800.287205] I/O error, dev nvme0n1, sector 126200064 op 0x0:(READ) flags 0x1000 phys_seg 3 prio class 0
[  800.287207] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 0, rd 1, flush 0, corrupt 0, gen 0
[  800.287213] I/O error, dev nvme0n1, sector 5578112 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 0
[  800.287218] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 0, rd 2, flush 0, corrupt 0, gen 0
[  800.287218] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 1, rd 2, flush 0, corrupt 0, gen 0
[  800.287229] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 1, rd 4, flush 0, corrupt 0, gen 0
[  800.287223] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 1, rd 3, flush 0, corrupt 0, gen 0
[  800.287251] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 2, rd 4, flush 0, corrupt 0, gen 0
[  800.287260] I/O error, dev nvme0n1, sector 28921496 op 0x0:(READ) flags 0x0 phys_seg 9 prio class 0
[  800.287265] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 2, rd 5, flush 0, corrupt 0, gen 0
[  800.287272] I/O error, dev nvme0n1, sector 25162600 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0
[  800.287276] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 3, rd 5, flush 0, corrupt 0, gen 0
[  800.287278] BTRFS error (device dm-2): error loading props for ino 34305887 (root 257): -5
[  800.287280] BTRFS: error (device dm-2) in __btrfs_free_extent:3079: errno=-5 IO failure
[  800.287290] BTRFS info (device dm-2): forced readonly
[  800.287296] BTRFS: error (device dm-2) in btrfs_run_delayed_refs:2159: errno=-5 IO failure
[  800.298242] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 3, rd 6, flush 0, corrupt 0, gen 0
[  800.298240] nvme0n1: detected capacity change from 500118192 to 0
[  800.298248] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 3, rd 7, flush 0, corrupt 0, gen 0
[  800.298491] BTRFS warning (device dm-2): Skipping commit of aborted transaction.
[  800.298494] BTRFS: error (device dm-2) in cleanup_transaction:1974: errno=-5 IO failure
[  800.304975] BTRFS: error (device dm-2) in free_log_tree:3461: errno=-5 IO failure
[  849.947301] btrfs_dev_stat_print_on_error: 46 callbacks suppressed
[  849.947308] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 21, rd 36, flush 0, corrupt 0, gen 0
[  849.947407] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 21, rd 37, flush 0, corrupt 0, gen 0
[  849.948401] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 21, rd 38, flush 0, corrupt 0, gen 0
[  849.950301] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 21, rd 39, flush 0, corrupt 0, gen 0
[  849.950423] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 21, rd 40, flush 0, corrupt 0, gen 0
[  849.950559] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 21, rd 41, flush 0, corrupt 0, gen 0
[  849.950619] BTRFS error (device dm-2): bdev /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 errs: wr 21, rd 42, flush 0, corrupt 0, gen 0
[  965.619293] FAT-fs (nvme0n1p1): unable to read boot sector to mark fs as dirty
</pre>
-->
===== home auf andere Platte sichern sichern =====
: <code>sudo mkdir /home_s</code>
: <code>sudo mount /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 /home_s/ -t btrfs -o subvol=home</code>
: <code>sudo mkdir /home_d</code>
: <code>sudo mount /dev/mapper/luks-9097c5bd-6d98-444c-b0a9-649835ee8ae2 /home_d/ -t btrfs</code>
: <code>rsync -a /home_s/Ich-5/ /home_d/</code>
: <code>sudo mkdir /root_s</code>
: <code>sudo mount /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 /root_s/ -t btrfs -o subvol=root</code>
: <code>mkdir /home_d/root</code>
: <code>sudo rsync -a /root_s /home_d/root</code>
== Fedora meets snapper ==
* https://sysguides.com/install-fedora-38-with-full-disk-encryption-snapshot-and-rollback-support/
== eigenen Kernel signieren (für [[wikipedia:en:secure boot|secure boot]]) ==
* https://sysguides.com/fedora-uefi-secure-boot-with-custom-keys/

Aktuelle Version vom 9. Oktober 2023, 05:24 Uhr

Probleme und Lösungen[Bearbeiten]

Treiber fehlen (nach dem versehentlichen Löschen durch dnf mit --allowerasing)

dnf install mesa-dri-drivers

wayland oder xorg[Bearbeiten]

echo $XDG_SESSION_TYPE
wayland

Verwaltung von Partionen[Bearbeiten]

dnf search blivet-gui
dnf install -y blivet-gui

Fedora Silverblue[Bearbeiten]

Suchen von Paketen[Bearbeiten]

rpm-ostree bietet keine Suche für Pakete.

Erstellen von einem allgemeinen Container, falls noch keiner erstellt ist

toolbox -y create
Created container: fedora-toolbox-33
Enter with: toolbox enter

Aulisten aller (nun verfügbaren) Abbilder für Container

toolbox list -i
IMAGE ID      IMAGE NAME                                        CREATED
92d6fdd7ebda  registry.fedoraproject.org/f33/fedora-toolbox:33  12 days ago

Aulisten aller (nun verfügbaren) Container

toolbox list -c
CONTAINER ID  CONTAINER NAME     CREATED        STATUS      IMAGE NAME
1234567890ab  fedora-toolbox-33  5 minutes ago  configured  registry.fedoraproject.org/f33/fedora-toolbox:33

Suchen von einem Paket (beispielsweise dem Paket ddate) mit dem standardmäßigen Programm zur Verwaltung von Paketen dnf von außerhalb vom Container im Container

toolbox run dnf search ddate

ddate.x86_64 : Convert Gregorian dates to Discordian dates

Entfernen vom allgemeinen Container, falls er nicht mehr gebraucht wird

toolbox rm fedora-toolbox-33

Entfernen vom Abbild für einen allgemeinen Container, falls es nicht mehr gebraucht wird

toolbox rmi registry.fedoraproject.org/f33/fedora-toolbox:33

Experiment KDE (Wayland) Silverblue[Bearbeiten]

toolbox run sudo dnf group info kde


Group: KDE
 Description: The KDE Plasma Workspaces, a highly-configurable graphical user interface which includes a panel, desktop, system icons and desktop widgets, and many powerful KDE applications.
 Mandatory Packages:
   NetworkManager-config-connectivity-fedora
   abrt-desktop
   adwaita-gtk2-theme
   akregator
   bluedevil
   breeze-icon-theme
   colord-kde
   cups-pk-helper
   dnfdragora
   dolphin
   earlyoom
   firewall-config
   glibc-all-langpacks
   gnome-keyring-pam
   gwenview
   initial-setup-gui
   kaddressbook
   kamera
   kcalc
   kcharselect
   kcm_systemd
   kcolorchooser
   kde-gtk-config
   kde-partitionmanager
   kde-print-manager
   kde-settings-pulseaudio
   kdegraphics-thumbnailers
   kdeplasma-addons
   kdialog
   kdnssd
   keditbookmarks
   kf5-akonadi-server
   kf5-akonadi-server-mysql
   kf5-baloo-file
   kf5-kipi-plugins
   kfind
   kget
   kgpg
   khelpcenter
   khotkeys
   kinfocenter
   kmag
   kmail
   kmenuedit
   kmousetool
   kmouth
   konsole5
   kontact
   korganizer
   kruler
   kscreen
   kscreenlocker
   ksshaskpass
   ksysguard
   kwalletmanager5
   kwebkitpart
   kwin
   kwrite
   pam-kwallet
   phonon-qt5-backend-gstreamer
   pinentry-qt
   plasma-breeze
   plasma-desktop
   plasma-desktop-doc
   plasma-discover
   plasma-drkonqi
   plasma-nm
   plasma-nm-l2tp
   plasma-nm-openconnect
   plasma-nm-openswan
   plasma-nm-openvpn
   plasma-nm-pptp
   plasma-nm-vpnc
   plasma-pa
   plasma-pk-updates
   plasma-user-manager
   plasma-workspace
   plasma-workspace-geolocation
   polkit-kde
   qt5-qtbase-gui
   qt5-qtdeclarative
   sddm
   sddm-breeze
   sddm-kcm
   spectacle
   xorg-x11-drv-libinput
 Conditional Packages:
   qt-at-spi

https://pagure.io/workstation-ostree-config/blob/master/f/kde-desktop-pkgs.yaml

btw
2020-11-16:
rpm-ostree install plasma-drkonqi

failed

rpm-ostree install initial-setup-gui

failed


systemctl disable gdm
systemctl enable sddm

Auswaehlen von Plasma (Wayland) bei der Anmeldung

echo $XDG_SESSION_TYPE
wayland

Logo Fedora Silverblue[Bearbeiten]

wget -c https://silverblue.fedoraproject.org/public/silverblue-logo.svg
wget -c https://silverblue.fedoraproject.org/public/silverblue-black.svg
wget -c https://silverblue.fedoraproject.org/public/silverblue-white.svg

systemd management GUI[Bearbeiten]

systemd control module von KDE[Bearbeiten]

Installieren vom Paket kcm_systemd ()

sudo dnf -y install kcm_systemd

Starten der Anwendung kcm_systemd

kcmshell5 kcm_systemd

System von USB (live) erreichen[Bearbeiten]

Mit dem Programm (GUI) Disks den Massenspeicher vom System entschluesseln.

sudo mount /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 /mnt -t btrfs -o subvol=root
ls /mnt
sudo mount /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 /mnt/home -t btrfs -o subvol=home
ls /mnt/home/
sudo mount /dev/nvme0n1p2 /mnt/boot
sudo mount /dev/nvme0n1p1 /mnt/boot/efi
sudo mount --bind /dev /mnt/dev
sudo mount -t proc /proc /mnt/proc
sudo mount -t sysfs /sys /mnt/sys
sudo mount -t tmpfs tmpfs /mnt/run
mkdir -p /mnt/run/systemd/resolve/
echo 'nameserver 9.9.9.9' > /mnt/run/systemd/resolve/stub-resolv.conf
sudo chroot /mnt

ping heise.de
sudo flatpak update
sudo dnf update
ls -l /lib64/libcrypto.so.3
rm /lib64/libcrypto.so.3
ln /lib64/libcrypto.so.3.0.5 /lib64/libcrypto.so.3
sudo dnf update
rm /lib64/libssl.so.3
ln -s /lib64/libssl.so.3.0.5 /lib64/libssl.so.3
sudo dnf update
rm /lib64/liblzma.so.5
ln -s /lib64/liblzma.so.5.2.5 /lib64/liblzma.so.5



home auf andere Platte sichern sichern[Bearbeiten]
sudo mkdir /home_s
sudo mount /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 /home_s/ -t btrfs -o subvol=home
sudo mkdir /home_d
sudo mount /dev/mapper/luks-9097c5bd-6d98-444c-b0a9-649835ee8ae2 /home_d/ -t btrfs
rsync -a /home_s/Ich-5/ /home_d/
sudo mkdir /root_s
sudo mount /dev/mapper/luks-d7064367-0e36-4dce-a0de-94401230d6f4 /root_s/ -t btrfs -o subvol=root
mkdir /home_d/root
sudo rsync -a /root_s /home_d/root

Fedora meets snapper[Bearbeiten]

eigenen Kernel signieren (für secure boot)[Bearbeiten]